EN  CN

河南均美铝业有限公司
Check category

Welding of tube tube of titanium tube heat exchanger

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-08-27 09:38
  • Views:

(Summary description)Use acetone to carefully clean the oil, water and impurities on the surface of the tube and the orifice. For the requirements of the orifice plate,

Welding of tube tube of titanium tube heat exchanger

(Summary description)Use acetone to carefully clean the oil, water and impurities on the surface of the tube and the orifice. For the requirements of the orifice plate,

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-08-27 09:38
  • Views:
Information

Use acetone to carefully clean the oil, water and impurities on the surface of the tube and the orifice. For the requirements of the orifice plate, the hole diameter is larger than the pipe diameter of 0.5 mm to ensure the clearance. Strictly clean the site before welding, reduce the content of iron ions in the air, and then carefully clean the welding tools, and then thoroughly clean and dry the surface of the workpiece with sandpaper and acetone.

Scan the QR code to read on your phone